Raiding another player's base in ROB RUN comes down to one essential task: reduce the target building's Security System Defense to zero with Breach Decoders. The challenge is not simply finding a way inside. Decoders are consumable, each protected structure has its own security requirement, and a heavily upgraded building can demand far more supplies than its basic Defense suggests.
The most reliable approach is to inspect each target, calculate its decoder cost, and decide whether the potential loot justifies the investment. That matters especially when a property contains multiple secured buildings: breaching the house does not automatically open its garage, warehouse, workshop, or other structures.
Where to Get Breach Decoders in ROB RUN
Breach Decoders are raid supplies, so build a stock before targeting another player's property. The available acquisition routes include looting and specific progression or barter rewards. The exact value of each route depends on which decoder tier you need and what resources you are willing to spend.
Find Uncommon Decoders Through Looting
Uncommon Decoders can appear in safes, cabinets, containers, and robbery loot. Since each installation consumes a decoder, finding one does not necessarily mean you have enough to complete a breach. Check loot opportunities as you progress and keep the items you expect to need for a planned raid.
The Season 1: Pure Chemistry battle pass also lists an Uncommon Decoder on page three for 3,000 season currency. This is a specific progression reward rather than an endlessly repeatable source. Check the current pass page and reward conditions before spending currency solely to obtain it.
Trade for an Epic Decoder at Lenny's Motel
A barter trader behind the Suspicious Door at Lenny's Motel offers an Epic Decoder through two exchanges:
| Exchange | Required items | Result |
|---|---|---|
| Decoder trade | 3 Uncommon Decoders + $10,000 | 1 Epic Decoder |
| Action Camera trade | 1 filled Action Camera | 1 Epic Decoder |
The first option converts three low-tier decoders into one stronger item, but it also requires $10,000 in ROB RUN cash. Include that fee in your raid budget rather than treating the upgrade as free.
The filled Action Camera route lets you preserve your Uncommon Decoder stock, provided you already have the required camera ready. Compare the opportunity cost of each exchange before committing valuable items. A decoder may save time during a raid, but the resources used to obtain it could also support other parts of your progression.
Which Decoder Should You Use?
Decoder rarity determines how much Defense one installation removes. Each installation takes approximately 12 seconds, making higher-tier decoders more efficient when time at a security terminal is a concern.
| Decoder rarity | Defense removed per use | Uses to remove 15 Defense | Installation time |
|---|---|---|---|
| Uncommon | 1 | 15 | 3 minutes |
| Epic | 3 | 5 | 1 minute |
| Legendary | 5 | 3 | 36 seconds |
These figures cover installation time only. They do not include travel, moving between buildings, collecting loot, or escaping the property.
The upgrade from three Uncommon Decoders to one Epic Decoder does not increase the total breaching power: both remove three Defense points. The difference is speed. Three Uncommon installations take about 36 seconds, while one Epic installation takes about 12 seconds. That saves approximately 24 seconds at the terminal.
Use Uncommon Decoders when preserving cash and spending existing supplies matter more than speed. Epic Decoders reduce the number of interactions required. Legendary Decoders offer the highest breaching value per use, but their availability and acquisition cost should be checked in the current game build before planning around them.
How Many Decoders Does Each Building Need?
The basic calculation is straightforward:
Required Decoders = current Defense ÷ Defense removed per decoder, rounded up.
For example, a structure with 15 Defense requires 15 Uncommon, five Epic, or three Legendary Decoders. Always use the terminal's displayed Defense for an actual raid; a building's starting value is not necessarily its current value.
Base Defense and Maximum Decoder Costs
Every structure starts with base Defense. Its Security System can gain additional Defense through installed fuses. The table below shows the starting values, fuse capacity, maximum Defense, and the number of decoders needed at that maximum.
| Structure | Base Defense | Fuse slots | Maximum Defense | Uncommon / Epic / Legendary |
| Trailer | 5 | 9 | 50 | 50 / 17 / 10 |
| Small House | 15 | 27 | 150 | 150 / 50 / 30 |
| Mansion | 30 | 42 | 240 | 240 / 80 / 48 |
| Car Garage | 4 | 6 | 34 | 34 / 12 / 7 |
| Large Car Garage | 6 | 12 | 66 | 66 / 22 / 14 |
| Warehouse | 10 | 15 | 85 | 85 / 29 / 17 |
| Workshop | 5 | 9 | 50 | 50 / 17 / 10 |
| Grow Room | 5 | 9 | 50 | 50 / 17 / 10 |
| Chemical Laboratory | 3 | 6 | 33 | 33 / 11 / 7 |
| Mesh Fence | 2 | 3 | 17 | 17 / 6 / 4 |
| Metal Fence | 5 | 6 | 35 | 35 / 12 / 7 |
| Concrete Fence | 10 | 9 | 55 | 55 / 19 / 11 |
Decoder quantities assume one rarity is used for the entire breach. Maximum Defense represents a structure with every fuse slot filled with a Legendary fuse; it is not the cost of every building of that type.
The Mansion has the highest maximum Defense in this list, but that does not mean every Mansion is automatically an expensive target. A lightly upgraded Mansion may be cheaper to breach than a smaller building whose owner has installed stronger fuses. Check the actual terminal rather than judging by the property's appearance.
Calculate Each Structure Separately
A no-fuse Trailer starts at five Defense. It therefore requires five Uncommon, two Epic, or one Legendary Decoder.
A multi-structure route needs a separate calculation for every protected building. For example, a no-fuse Mesh Fence has two Defense and requires one Epic Decoder. A no-fuse Car Garage has four Defense and requires two Epic Decoders. You need three Epic Decoders for both breaches, even though their combined Defense is six.
Do not assume that opening one structure unlocks the rest of the property. A house, garage, warehouse, workshop, grow room, and secured fence can each have a separate Security System. Farm fences are an exception in the supplied mechanics: they do not have Security Systems and cannot be hacked with decoders.
This distinction can prevent a costly mistake. If you can afford to breach the outer structure but lack the supplies for the building containing the loot you want, reconsider the route before using your first decoder.
How to Breach a Base and Complete the Raid
Once you have selected a target and prepared enough supplies, locate the structure's Security System terminal. Check its current Defense before installing anything.
Follow this sequence:
- Confirm the target. Make sure the terminal belongs to the building you intend to enter.
- Check current Defense. Use the displayed value rather than relying on the structure's base or maximum figure.
- Calculate your decoder supply. Divide Defense by the decoder's breaching value and round up.
- Install decoders until Defense reaches zero. Monitor the remaining Defense as each installation completes.
- Enter and collect your intended loot. Treat every additional secured structure as a separate breach with its own cost.
Reaching zero Defense grants temporary access through that structure's doors, gates, and windows. It does not permanently transfer control of the building. The owner can repair the Security System and lock you out again, so avoid spending unnecessary time inside once access is available.
Account for Alerts and Defender Responses
The number of decoders is only part of the risk calculation. Defense modules can alert the owner's allies to an attack, potentially bringing defenders to the property while you are still working on the terminal.
That makes installation time strategically important. An Epic Decoder can complete three points of breaching work in one interaction, while three Uncommon Decoders require three separate installations. The total Defense removed is identical, but the shorter sequence can reduce the time you remain exposed at the terminal.
Before starting, decide which loot you actually intend to take and avoid opening extra structures without a clear reason. If a second building requires another batch of decoders, weigh its likely value against the additional time and risk.
Plan Your ROB RUN Cash and Decoder Budget Before Attacking
A successful raid begins before the first terminal interaction. Count the decoders required for every structure on your intended route, include any $10,000 barter fee if you are converting Uncommon Decoders into an Epic one, and leave room in your ROB RUN cash plan for other progression needs.
The key is to budget by individual Security System, not by property size. A small target can be expensive when heavily upgraded, while a larger building with little additional Defense may be a more practical choice. If the total cost exceeds your available supplies, save your decoders for a target you can fully access.
The most efficient raid is not necessarily the one that opens the biggest property. It is the one where the expected loot, decoder cost, installation time, and risk of being interrupted make sense together.